Which Product Should I Use To Repair Holes In My Concrete Driveway

Large Physical Hole Repair and Thick Concrete Patch Product - Deep Patch™ by SureCrete

---

Large Concrete Pigsty Patching and Thick Cement Repair Production - Deep Patch™ past SureCrete

---

Deep Patch™ is a only add waterconcrete patch for largeconcrete voids  or holes. Performing well in filling low spots on horizontal surfaces and filling open areas (due east.g. planters). The silicate aggregate size will cut the usual shrink cracks associated with topping mixes used for concrete repairs. Contractors and DIY homeowners alike volition desire to take advantage of the benefits of Deep Patch™ for their many physical patching projects . It tin give a suitable alternative to destroying one-time, damaged concrete and having to repair a new slab entirely. This production volition allow the applicator just to remove the physical areas that are too damaged to repair and fill in those voids instead of replacing the entire substrate.

Contractors will speed up a restoration process, as instead of having to wait 28 days for a freshly poured physical to cure, most of all, customers tin can start applying a finished flooring product on superlative of Deep Patch™ the very next day.

---

Deep Patch™ a  Thick Concrete Repair Product - Typical applications:

• Kitchen Floors
• Bathroom Floors
• Shower Floors
• Residential Living Area Floors
• Walkways
• Parking Garages
• Thick Concrete Repair
• Patio Floors
• Pool Decks
• Driveways
• Sidewalks
• Commercial Floors
• Large Physical Hole Repair
• Dwelling Concrete Cracks

How to Apply SureCrete Deep Patch™ Concrete Hole Patching Leveling Cloth?

1. 1. Clean the surface – Physical substrate should be completely clear of whatever grease, oil, old paint, etc.. Otherwise it will not grade a expert bond.
   2. While not ever necessary, some areas may need profiling if they are exceptional "tightly trowelled." Easily exist done with another of our Surface Grooming products - SCR.
   3. Dampen the surface of the concrete (no puddles, though!). Then apply a thin blanket of SureBond (associated product used as a bonding agent, mixed with water, sold separately) to a small work area and so as not to let it dry out out.

Mix Deep Patch™ with water thoroughly in a large bucket. While working to ensure information technology does non ready upward before information technology can be applied.

1. Apply Deep Level to But the work area where SureBond is present, not dry out. Keep following these steps until all sectors have been patched/covered to your satisfaction! Deep Level is typically trowelled into place; however, application methods will vary depending on the project needs.
2. Patches in backlog of two" (5 cm) up to four" (10cm) require the introduction of # 8 pea gravel (3/viii - ½" [9.5 – 12.7 mm]) at the rate of 10 pounds (iv.5 kg) pea gravel to 1 – 50 pound (22.seven kg) pocketbook of Deep Patch™.

Base Coat
ane. Before applying Deep Patch™, the surface should be saturated surface dry out with make clean water (SSD or damp, no puddles).
2. Apply SureBond™ co-ordinate to the TDS Deep Level

Patching Coat
1. While SureBond™ is still wet, use Deep Level™.
2. Utilize Deep Patch™ by trowel or squeegee, ensure the product is tightly placed into patched area.

---

Oft Asked Questions Well-nigh Deep Patch™ Large Concrete Pigsty Repair

Question: How thick tin I go with Deep Level Big Concrete Hole Repair?

Past itself, we exercise non suggest going any thicker than ii" to repair holes. Still, with small pea gravel amass into the mix, that may be stretched and to as much every bit 4". See the TDS for specific instructions on this application method

Question: What'southward the thinnest I can go with Deep Level Concrete Hole Repair? Can I requite it a feather edge?

This production was not designed to be able to give a tight, feathered edge, or a finished surface. The amass size is quite large; the thinnest is can be applied 1/eight". If a smoothing feathered repair concrete finished edge is desired, try using 1 of our other products such every bit FlashPatch™ or SureTex™ with Deep Level.

Question: How long do I have to wait earlier applying an overlay on top of Deep Level Concrete Thick Repair?

While an overnight cure of 12 hours, enough for most coatings systems, depending on the thickness that Deep Level was applied, nosotros suggest waiting a concrete setting full 24 hours before putting any overlay or surface on top of a new Deep Level awarding.

Question: Can Concrete Deep Hole Filler and Repair Croaky be Colored?

Yes. Still our coloring systems matching color charts have formulated based on white-cement-based products, so we cannot offer a typical color chart picking and choose the finished colour from, they volition almost seem dissimilar in Deep Patch™ since it is a grey-cement-based mix.

---

Specifications - Backdrop of Deep Level Concrete Deep Hole Filler

Coverage	0.46 cubic anxiety per 50 lb bag
Shelf Life	12 months in unopened package
VOC Rating	0 m/L
Compressive Strength	ASTM C 109: 24 hours = 3,130 PSI (21,581 kPa); 28 days = five,000 PSI (34,474 kPa)
Tensile Strength	ASTM C 109: 1 solar day = 280 PSI (i,931 kPa); 28 days = 890 PSI (vi,136 kPa)
Flexural Forcefulness	ASTM C 348: ane day = 210 PSI (ane,448 kPa); 28 days = 550 PSI (3,792 kPa)
Abrasion Resistance	grams lost @ ane/4" (0.635 cm) thickness: 24 hours = 1 gram; 7 days = ane gram

Deep Patch™ is thick concrete repair product Deep Concrete Patch Repair SKU: 15101001 UPC: 842467102206

Source: https://surecretedesign.com/product/thick-concrete-repair/

Posted by: taymosted1971.blogspot.com

Share this post